Application advice for hops
How to apply AKRA products for a successful hop harvest.
For conventional farming
For organic farming
For conventional farming
Spreading
Soil fertilising
Application rate per ha
250-300 kg AKRA Kombi
AKRA DGC depending on fractional soil analyses
Nitrogen as required
Application rate per ha
250-300 kg AKRA Kombi
AKRA DGC depending on fractional soil analyses
Nitrogen as required
Planting out- seedlings
100 l Water
1 l AKRA Saat-Power
Tips:
Leave seedlings in the solution for 2–3 hours
Leave potted plants in the solution for 2 minutes
Spraying at vegetation start
Application rate per ha
300 l water
2 l AKRA Stroh R+P+K
2 l AKRA MSB
2 l AKRA Sulpur+
2 l AKRA WD
Wetting agent
300 l water
2 l AKRA Stroh R+P+K
2 l AKRA MSB
2 l AKRA Sulpur+
2 l AKRA WD
Wetting agent
Spraying with shoot length of 30 cm
Application rate per ha
300 l water
0.5 l AKRA Plus 9
2 l AKRA Blatt
Fungicide as needed (50% of recommended quantity)
2 l AKRA MSB
0.5 l AKRA Sulpur+
0.2 l AKRA WD
300 l water
0.5 l AKRA Plus 9
2 l AKRA Blatt
Fungicide as needed (50% of recommended quantity)
2 l AKRA MSB
0.5 l AKRA Sulpur+
0.2 l AKRA WD
Spraying with a shoot length of up to 100 cm
Application rate per ha
600-1000 l water
0.2% AKRA Plus 9
0.8% AKRA Blatt
Fungicide as needed (50% of recommended quantity)
0.5% AKRA MSB
0.1 l AKRA Azotobacter
0.3% AKRA Sulpur+
0.2% AKRA WD
600-1000 l water
0.2% AKRA Plus 9
0.8% AKRA Blatt
Fungicide as needed (50% of recommended quantity)
0.5% AKRA MSB
0.1 l AKRA Azotobacter
0.3% AKRA Sulpur+
0.2% AKRA WD
Spraying with a shoot length from 200 cm as required
Application rate per ha
1000-1200 l water
0.2% AKRA Plus 9
0.8% AKRA Blatt
Fungicide as needed (50% of recommended quantity)
0.5% AKRA MSB
0.2% AKRA Azotobacter
0.3% AKRA Sulpur+
0.2% AKRA WD
1000-1200 l water
0.2% AKRA Plus 9
0.8% AKRA Blatt
Fungicide as needed (50% of recommended quantity)
0.5% AKRA MSB
0.2% AKRA Azotobacter
0.3% AKRA Sulpur+
0.2% AKRA WD
Additional information
- Seek specific information when dealing with severe infestations of spider mites, rust mites, red spider mites or aphids.
- Apply the bud spray over the entire area.
- The pH value of the spray solution should be adjusted to 5.5 with citric acid.
- The addition of AKRA foliar fertiliser can and may reduce the pH value of the spray solution.
- Mix in any other products individually once the pH value has been adjusted.
- Make sure that you add the additional products in the right order.
- The dosage of AKRA foliar fertiliser must be adjusted to the quantity of water used.
For organic farming
Spreading
Soil fertilising
Application rate per ha
250-300 kg AKRA Kombi
AKRA DGC depending on fractional soil analyses
Application rate per ha
250-300 kg AKRA Kombi
AKRA DGC depending on fractional soil analyses
Planting out-seedlings (saplings)
Application rate per ha
100 l Water
1 l AKRA Saat-Power
Tips:
- Leave seedlings in the solution for 2–3 hours
- Leave potted plants in the solution for 2 minutes
Spraying at vegetation start
Application rate per ha
350 l water
2 l AKRA Stroh R+P+K
2 l AKRA MSB
2 l AKRA Sulpur+
2 l AKRA WD
Wetting agent
350 l water
2 l AKRA Stroh R+P+K
2 l AKRA MSB
2 l AKRA Sulpur+
2 l AKRA WD
Wetting agent
Spraying with shoot length of 30 cm
Application rate per ha
400 l water
0.5 l AKRA Plus 9
2 l AKRA Blatt
0.5% AKRA MSB
0.2% AKRA Sulpur+
0.1% AKRA WD
400 l water
0.5 l AKRA Plus 9
2 l AKRA Blatt
0.5% AKRA MSB
0.2% AKRA Sulpur+
0.1% AKRA WD
Spraying with a shoot length of up to 100 cm
Application rate per ha
600-1000 l water
0.2% AKRA Plus 9
0.8% AKRA Blatt
0.5% AKRA MSB
0.1% AKRA Azotobacter
0.3% AKRA Sulpur+
0.2% AKRA WD
600-1000 l water
0.2% AKRA Plus 9
0.8% AKRA Blatt
0.5% AKRA MSB
0.1% AKRA Azotobacter
0.3% AKRA Sulpur+
0.2% AKRA WD
Spraying with a shoot length from 200 cm as required
Application rate per ha
1000-1200 l water
0.2% AKRA Plus 9
0.8% AKRA Blatt
0.5% AKRA MSB
0.2% AKRA Azotobacter
0.3% AKRA Sulpur+
0.2% AKRA WD
1000-1200 l water
0.2% AKRA Plus 9
0.8% AKRA Blatt
0.5% AKRA MSB
0.2% AKRA Azotobacter
0.3% AKRA Sulpur+
0.2% AKRA WD
Additional information
- Seek specific information when dealing with severe infestations of spider mites, rust mites, red spider mites or aphids.
- Apply the bud spray over the entire area.
- The pH value of the spray solution should be adjusted to 5.5 with citric acid.
- The addition of AKRA foliar fertiliser can and may reduce the pH value of the spray solution.
- Mix in any other products individually once the pH value has been adjusted.
- Make sure that you add the additional products in the right order.
- The dosage of AKRA foliar fertiliser must be adjusted to the quantity of water used.
